Laboratory Ventilation Systems: Air Scrubbers, Ducts & Gas Treatment | Sager Lab Furniture

A fume hood is only one component of a safe laboratory environment. The ventilation system behind it — including ducts, exhaust fans, and air treatment equipment — determines whether contaminated air is effectively removed and whether the laboratory remains safe for occupants.

The Importance of a Complete Ventilation System

A well-designed laboratory ventilation system accomplishes several critical goals:

1. Personnel protection: Removes toxic fumes, vapors, and particulates at the source

2. Environmental compliance: Treats exhaust before release to meet environmental regulations

3. Temperature and humidity control: Maintains comfortable and stable working conditions

4. Cross-contamination prevention: Prevents fumes from one workstation from reaching another

5. Odor management: Keeps the laboratory environment pleasant and productive

At Sager Lab Furniture, we supply not only fume hoods but also complete ventilation and gas treatment systems to help you build a fully compliant laboratory.

Core Components of a Lab Ventilation System

1. Blower Fan

The blower fan is the engine of ventilation system. It creates the negative pressure that draws air through fume hoods and out of the building.

Key selection criteria:

 Airflow capacity (CFM or m³/h): Must match the total airflow requirement of all connected fume hoods

Static pressure rating: Must overcome duct resistance and any treatment equipment

Material: Choose corrosion-resistant fans (PP, FRP, or coated steel) for chemical labs

Noise level: Lower noise improves the working environment

Speed control: Variable speed drives allow airflow adjustment

2. Duct

Duct carries contaminated air from fume hoods to the exhaust point. Duct material selection is critical and depends on the chemicals being handled.

Duct Material

PP (Polypropylene): Strong acids, corrosive fumes, lower temperature tolerance.

PVC : General corrosive applications, Not for high temperature or certain solvents

Stainless Steel (304/316): High temperature, solvents, higher cost, less resistant to HCl

Galvanized Steel: General non-corrosive exhaust , will corrode with acids

Design best practices:

Keep duct runs as short and straight as possible.

Slope horizontal ducts toward a drain point to collect condensate.

Install access doors for cleaning and inspection.

Use seamless welded construction for corrosive exhaust

Label ducts clearly to identify contents and flow direction.

3. Air Wet Scrubbers

Air wet scrubbers remove contaminants from exhaust air by bringing it into contact with a scrubbing liquid (usually water or a chemical solution). They are essential when exhaust air contains water-soluble pollutants that cannot be released directly into the atmosphere.

How they work:

 Contaminated air enters the scrubber chamber.

Spray nozzles create a mist of scrubbing liquid.

Pollutants transfer from the air to the liquid droplets.

Cleaned air exits through a mist eliminator.

Contaminated liquid is collected and treated.

Applications:

Acid fume neutralization (HCl, H₂SO₄, HNO₃)

Ammonia removal

Particulate and dust capture

Odor control

Explore Sager's Air Wet Scrubbers for your laboratory exhaust treatment needs.

4. Activated Carbon Adsorption Filters

Activated carbon filters use the principle of adsorption to capture organic vapors and certain inorganic gases from exhaust air. The highly porous carbon material traps contaminant molecules on its surface.

How they work:

Exhaust air passes through a bed of activated carbon.

Organic molecules adhere to the carbon's porous surface.

Filtered air exits for release or further treatment.

Carbon is replaced or regenerated when saturated.

Applications:

Volatile organic compound (VOC) removal

Solvent vapor capture

Odor control

Low-concentration gas treatment

Best practice: Use activated carbon filters downstream of a wet scrubber for laboratories with mixed chemical exhaust, or as a standalone solution for organic chemistry labs.

Why Choose Sager for Laboratory Ventilation?

Sager Lab Furniture is a manufacturer with comprehensive product lines covering the full ventilation chain:

Fume hoods — steel, PP, and stainless steel options for every application

Exhaust fans and ductwork — matched to your system requirements

Air wet scrubbers — for acid and water-soluble pollutant removal

Activated carbon filter boxes — for VOC and odor control

Engineering support — our team assists with system design and component selection

We provide professional installation support including drawings, guidance documentation, and optional on-site technician assistance.

Planning a new laboratory or upgrading your ventilation? Contact Sager Lab Furniture at info@Sagerlabfurniture.com for a consultation and customized quotation. Our team is ready to help you design a safe, compliant, and efficient ventilation system.